• 100 millisecond cycle/scan time
• 6 configurable universal inputs
• 6 digital relay outputs
• 4 analogue outputs
• Optional Human Machine Interface (HMI) on a 4 line, 20 character backlit LCD **
• 25 user defined watches
• Data logging capacity of 512 kilobytes, approximately 50,000 readings
• Status of I/O points displayed on the LCD
• 1 x RS232 serial communications port
• 57600 Baud Rate
• All wire connections by 2.5mm screw terminals
• Program resides in non-volatile flash RAM
• Real Time Clock, battery backed for approximately 5 years

** Backlit LCD is only available on units manufactured after 2 July 2010

Innotech Maxim Controllers are designed for mounting inside a control cubicle. The Maxim offers a variety of inputs and outputs enabling it to monitor and control all types of external plant and equipment. Although the Maxim is flexible, it is primarily designed for the air conditioning and building automatation industry.

The small size of the Maxim also gives it the advantage of being fitted in small places without taking up valuable switchboard real-estate.

The creation of control strategies is made simple by the use of the Maxim configuration utility - MAXCon. This utility, with its powerful Graphical User Interface, allows the user to create an entire control strategy in block-diagram form.

Typical applications include:

• Air conditioning and heating systems
• Lighting control
• Time clock controller
• Monitoring device
• Cold/Freezer Rooms

• MaxCon - Maxim Controller Configuration utility. It allows the user to internally configure a Maxim by a simple point-and-click approach on a PC running Windows.



• MaxMon - Monitoring and debugging utility designed to help with commissioning and trouble-shooting a Maxim Controller.



• MaxSim - Utility that simulates a Maxim II Controller. The virtual Maxim II can be powered on, configured and interrogated in the same way as a physical Maxim II.



• iComm- Communications server used by Innotech software to communicate with Innotech digital controllers.



• MaxTract - Log extraction utility for a range of Innotech digital controllers. It allows extraction of all or part of the history log data residing on a Maxim controller into a specified data format.



• Innograph - Designed to specifically cater for the data log graphing capabilities of Innotech controllers, and it has the flexibility to display data log graphing information from other sources.



• Supervisor - A dynamic monitoring utility for Innotech controllers. It provides all the functionality that is available from an Innotech controller display panel with greater ease-of-use and flexibility.



• Magellan - Event-driven, object oriented real-time Supervisory Control and Data Acquisition package. It provides a simple, mechanism to design trivial or sophisticated supervisory or control programs.

Power Supply

• 24VAC ± 10% @ 50/60 Hz.
• 24VDC ± 10%.

Transformer nominal rating of 5VA.
The operating voltage must meet the requirements of Safety Extra Low Voltage (SELV) to EN60730. The transformer used must be a safety transformer in compliance with EN60742 and be designed for 100% duty. It must also be sized and fused in compliance with local safety regulations.

Temperature Ratings

• Storage: 0 to 50°C non-condensing.
• Operating: 0 to 40°C non-condensing.

Inputs
6 Universal Inputs, configurable via software to either:

• Dry Digital Inputs
• Voltage Digital Inputs
• 10K Thermistor Inputs
• 0-10V DC
• LUX sensor input (Light sensor ORP12 LDR)
• Dry Duty Cycle Inputs
• Voltage Duty Cycle Inputs
• Dry Pulse Counter Inputs
• Voltage Pulse Counter Inputs

Notes:

• Exact Input combinations may be limited by the device
• Input accuracy is ±0.1 volts
• Error is less than 0.2% with 15Hz square wave input
• LUX Sensor Input mode is useful for switching based on ambient light levels, but is not suitable for any operation which requires the accurate measurement or recording of light levels

Outputs

• 6 Digital Outputs
• 6 x normally open relays (2 amp @ 24VAC)
• Recomended use of pilot relays when switching high voltage/inductive loads
• 4 Analogue Outputs
  
  • Analogue Outputs 1 and 2 can be configured individually as either linear 0-10VDC or PWM outputs
  • Analogue Outputs 3 and 4 are dedicated linear 0-10VDC outputs
  • Output Load > 2kOhms

Note: Up to 3 solid state relays can be connected in series, to the analogue outputs when configured as PWM.

Battery
Contains a Lithium Battery; dispose of properly.

• Type CR-2032 Lithium
• Nominal voltage 3 Volts
• Shelf life ~5 Years dependant on ambient temperature

CAUTION: Risk of explosion if battery is replaced by an incorrect type.

Enclosure
The MAXIM is housed in rectangular case suitable for DIN Rail mounting. The housing is moulded from flame retardant plastics recognised by UL as UL 94-V0.

• Colour: Grey
• Dimensions (max): 107mm(w) x 89mm(h) x 69mm(d)

Data Logging
The MAXIM Controller comes with a powerful Data Logging facility. Data Logging can be assigned to hardware and software points. Approximately 50,000 time stamped readings can be stored on the Maxim. All data is stored in a 512 kilobytes non volatile flash RAM. When the memory becomes full, new readings replace the oldest readings. All logged data points can be extracted by using the MAXTract Software tool.

Communications

• RS232:
• RJ45 connection allowing local computer access for purposes of uploading, downloading and monitoring configuration programs and the extraction of logged data.
Note: Maximum cable length is 5 metres.

Datasheet

• Maxim I Datasheet (.pdf 1.06 MB )

Other Downloads

• Aquaculture Advert (.pdf 244 KB )
• Horticulture Advert (.pdf 945 KB )
• Hotel Advert (.pdf 386 KB )
• Maxim & Genesis Awards Advert 1 (.pdf 284 KB )
• Maxim & Genesis Awards Advert 2 (.pdf 516 KB )
• Maxim & Genesis Environmental Advert (.pdf 798 KB )
• Maxim & Genesis Precise Control Advert (.pdf 697 KB )
• Maxim Operating Instructions Ver.5 (.pdf 1002 KB )
• Maxim Operating Instructions Ver.6 (.pdf 967 KB )
• Maxim Software Bundle v5.50 (Release 6) (.exe 26.11 MB )
• Maxim Software Bundle v5.50 Release 6 Update (.exe 15.23 MB )

To purchase this product contact the Innotech Sales Team

Innotech Brisbane (HQ):

• Phone: +61 7 3841 1388
• Fax: +61 7 3841 1644
• Email: sales@innotech.com.au

Innotech Sydney:

• Phone: +61 2 9737 9462
• Fax: +61 2 9737 9463
• Email: nswsales@innotech.com.au

Or view our distributor list

For more details download the datasheets for this product.

• Maxim I Datasheet